Описание

ABSF Lithium Battery Pack Expansion Board Power Supply with Switch for Raspberry Pi 3,2 Model B,1 Model B+ Banana Pi
Double USB outputs, one for the Raspberry Pi, the other for the embedded LCD screen. Coming with fastening standoffs, screws and nut, so you can stack the Raspberry Pi board on the module
The power module is designed for the Raspberry Pi 3 Model B specially, allowing the master board to work offline for up to 9 hours. It's not only supplying for Raspberry Pi; this board has 2 USB type-A ports - one supplies power for the Raspberry Pi and the other for the embedded LCD screen.
The module integrates a Li-ion battery charger IC, a boost management chip. And it is developed in strict accordance with the size of the international Raspberry Pi expansion board HAT, using only simple copper standoffs to install multi-layer Raspberry Pi boards.
This product is 2 parts of the evaluation, namely: the maximum current evaluation, Pi3 with different types of liquid crystal after the actual life of the test. Maximum current evaluation, the use of high-precision EBC-10 electronic load on the product for testing.
We put this product on the following six kinds of PI3 configuration for power supply. Considering battery individual differences, three rounds of endurance test. Respectively: PI3 single life, inch Pi3+2.2, inch Pi3+3.5, inch Pi3+5, Pi3+ official 7 inch, Pi3+ flurries 7 inch of endurance test.
Colour: blue
Material: plastic
Type: Voltage Regulator
is,customized: Yes
Supply Voltage: 110,240
Dissipation Power: 50
Model Number: Lithium Battery Pack Expansion Board Power Supply
Operating Temperature: 50
Condition: New
Application: raspberry pi and Banana Pi
A power module especially designed for Raspberry Pi, which enables using the Raspberry Pi in a moveable manner
Battery capacity: 3800mAH (maximum); Output current: 1.8A
Output voltage (no load): 5.1V +/- 0.1V
Battery capacity: 3800mAH
Maximum discharge current: 1.8A
No-load output voltage: 5.1V +/- 0.1V
Standard charging current/voltage: 1.0A/5.0V
Cut-off voltage of fully charging the Li-ion battery: 4.18V - 4.2V
Package Contents:
1 x Raspberry pi PowerPack board
1 x The installation of stud, screw, nut
1 x 3800mAH Battery
1 x USB cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
The power module is designed for the Raspberry Pi 3 Model B specially, allowing the master board to work offline for up to 9 hours. It's not only supplying for Raspberry Pi; this board has 2 USB type-A ports - one supplies power for the Raspberry Pi and the other for the embedded LCD screen.
The module integrates a Li-ion battery charger IC, a boost management chip. And it is developed in strict accordance with the size of the international Raspberry Pi expansion board HAT, using only simple copper standoffs to install multi-layer Raspberry Pi boards.
This product is 2 parts of the evaluation, namely: the maximum current evaluation, Pi3 with different types of liquid crystal after the actual life of the test. Maximum current evaluation, the use of high-precision EBC-10 electronic load on the product for testing.
We put this product on the following six kinds of PI3 configuration for power supply. Considering battery individual differences, three rounds of endurance test. Respectively: PI3 single life, inch Pi3+2.2, inch Pi3+3.5, inch Pi3+5, Pi3+ official 7 inch, Pi3+ flurries 7 inch of endurance test.
Colour: blue
Material: plastic
Type: Voltage Regulator
is,customized: Yes
Supply Voltage: 110,240
Dissipation Power: 50
Model Number: Lithium Battery Pack Expansion Board Power Supply
Operating Temperature: 50
Condition: New
Application: raspberry pi and Banana Pi
A power module especially designed for Raspberry Pi, which enables using the Raspberry Pi in a moveable manner
Battery capacity: 3800mAH (maximum); Output current: 1.8A
Output voltage (no load): 5.1V +/- 0.1V
Battery capacity: 3800mAH
Maximum discharge current: 1.8A
No-load output voltage: 5.1V +/- 0.1V
Standard charging current/voltage: 1.0A/5.0V
Cut-off voltage of fully charging the Li-ion battery: 4.18V - 4.2V
Package Contents:
1 x Raspberry pi PowerPack board
1 x The installation of stud, screw, nut
1 x 3800mAH Battery
1 x USB cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

|

ВсеТовар мы можем отгрузить в течение 5-8 рабочих дней, обычно мыВ зависимости от времени заказа клиента для упаковки и отгрузки, мы должныВнимательно проверьте качество товара перед отправкой, поэтому ВозьмитеВремени, чтобы справиться с этим. Время доставки: Из-заК факторам форс-мажорных обстоятельств: ураганы, дождевые штормы влияют на полеты. ВедущийДля того чтобы логистика задержки. Мы честные продавцы, не дадим вам страдатьПотери. Пожалуйста, дайте логистической компании немного времени на обработку, мыПодождите, пока посылка дойдет до вашей стороны. Если ваша информация о логистике поступает в местное почтовое отделение: В том случае, еслиМестное почтовое отделение не свяжется с вами, пожалуйста, свяжитесь с вашимМестное почтовое отделение как можно скорее, чтобы получить посылка. В противном случаеСверхурочное получение посылок, местное почтовое отделение вернет вамПосылка, ответственность за себя. Время защиты заканчивается: В тех случаях, когдаМы закончили время отгрузки, если срок защиты продуктаНа исходе, пожалуйста, увеличьте срок защиты продукта самостоятельно илиСвяжитесь с нами, пожалуйста, не открывайте спор напрямую. Ввозные таможенные пошлины: НалогиИ сборы не включены в стоимость товара или стоимость доставки.Ответственность за эти расходы несет покупатель. Ввозные пошлины, налоги иРасходы не включены в стоимость товара или стоимость доставки. ЭтиРасходы оплачиваются покупателем




Если товар поврежден, мы должны связаться в течение 24 часов с момента получения.
Если данный товар находится в вашем распоряжении более 7 дней, он считается пользованным товаром, и мы не производим возврат или замену. В том случае, еслиВы не удовлетворены полученным товаром (неправильный, поврежденный,Дефект, или товар не соответствует описанию), пожалуйста, верните его в течение 7 дней дляЗамена или возврат денег.Для любогоЛичные причины (выбрать не нравится или мне не нужен этот продуктБольше), возврат расходы по доставке будет нести ответственность покупателя. МыНе принимаются какие-либо предметы с запахами (духи. Дым, и т. Д.)
ВсеВозвращенные товары должны быть в оригинальной упаковке, и вы должны предоставитьНам с номером отслеживания доставки, конкретной причиной возврата,И ваш заказ ID.Характеристики
- Номер модели
- Lithium Battery Pack Expansion Board Power Supply

















