Описание

Features:
Small size, easy to carry
Specification:
Size: about 7x4x2cm/2.75x1.57x0.78''
Color: Black
Material: ABS
Calibrating film: 0.1mm 0.25mm 0.5mm 1mm 2mm
Battery: 3V button battery (without battery)
User Manual Languages: English
Measurement range: 0.0 to 2.0 mm, 0 mil to 80 mil
Accuracy: 2%rdg +/- 0.1 mm, or 2%rdg+/- 4 mil
Resolution:0.1 mm/1 mil
Power supply: 1 x 3 V button cell, CR2032 or equivalent,
Measuring technology: Magnetic
Weight: About 23 grams (not including button cell)
Operation:
1. Probe
Before measurement, place the tester with its probe firmly against target surface.
2. Display
3. "TEST" button
A. Press "TEST" button to turn on the tester. Press and h old down this button for about 1 second to turn off the tester.
B. Press "TEST" button to delete the reading on the display,the display will show "- -".
4. "UNIT" button
Press this "UNIT" button to select desired unit: mm or mil.
5. EM2271A
The upgrated EM2271. It can measure the Fe & NFe. Accuracy improved, measurement range extended, resolution higher, better cost-efficiency.
Warning:
Please don't use this device under 0 degrees Celsius !
Note: The working accuracy of the system is at 23℃+/- 5℃, and the relative humidity is less than equal 80%.
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understand.
Included:
1 x Painting Thickness Tester(not including button cell)
5 x Sheet Adjustments
1 x User Manual
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Small size, easy to carry
Specification:
Size: about 7x4x2cm/2.75x1.57x0.78''
Color: Black
Material: ABS
Calibrating film: 0.1mm 0.25mm 0.5mm 1mm 2mm
Battery: 3V button battery (without battery)
User Manual Languages: English
Measurement range: 0.0 to 2.0 mm, 0 mil to 80 mil
Accuracy: 2%rdg +/- 0.1 mm, or 2%rdg+/- 4 mil
Resolution:0.1 mm/1 mil
Power supply: 1 x 3 V button cell, CR2032 or equivalent,
Measuring technology: Magnetic
Weight: About 23 grams (not including button cell)
Operation:
1. Probe
Before measurement, place the tester with its probe firmly against target surface.
2. Display
3. "TEST" button
A. Press "TEST" button to turn on the tester. Press and h old down this button for about 1 second to turn off the tester.
B. Press "TEST" button to delete the reading on the display,the display will show "- -".
4. "UNIT" button
Press this "UNIT" button to select desired unit: mm or mil.
5. EM2271A
The upgrated EM2271. It can measure the Fe & NFe. Accuracy improved, measurement range extended, resolution higher, better cost-efficiency.
Warning:
Please don't use this device under 0 degrees Celsius !
Note: The working accuracy of the system is at 23℃+/- 5℃, and the relative humidity is less than equal 80%.
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understand.
Included:
1 x Painting Thickness Tester(not including button cell)
5 x Sheet Adjustments
1 x User Manual
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

|

ВсеТовар мы можем отгрузить в течение 5-8 рабочих дней, обычно мыВ зависимости от времени заказа клиента для упаковки и отгрузки, мы должныВнимательно проверьте качество товара перед отправкой, поэтому ВозьмитеВремени, чтобы справиться с этим. Время доставки: Из-заК факторам форс-мажорных обстоятельств: ураганы, дождевые штормы влияют на полеты. ВедущийДля того чтобы логистика задержки. Мы честные продавцы, не дадим вам страдатьПотери. Пожалуйста, дайте логистической компании немного времени на обработку, мыПодождите, пока посылка дойдет до вашей стороны. Если ваша информация о логистике поступает в местное почтовое отделение: В том случае, еслиМестное почтовое отделение не свяжется с вами, пожалуйста, свяжитесь с вашимМестное почтовое отделение как можно скорее, чтобы получить посылка. В противном случаеСверхурочное получение посылок, местное почтовое отделение вернет вамПосылка, ответственность за себя. Время защиты заканчивается: В тех случаях, когдаМы закончили время отгрузки, если срок защиты продуктаНа исходе, пожалуйста, увеличьте срок защиты продукта самостоятельно илиСвяжитесь с нами, пожалуйста, не открывайте спор напрямую. Ввозные таможенные пошлины: НалогиИ сборы не включены в стоимость товара или стоимость доставки.Ответственность за эти расходы несет покупатель. Ввозные пошлины, налоги иРасходы не включены в стоимость товара или стоимость доставки. ЭтиРасходы оплачиваются покупателем




Если товар поврежден, мы должны связаться в течение 24 часов с момента получения.
Если данный товар находится в вашем распоряжении более 7 дней, он считается пользованным товаром, и мы не производим возврат или замену. В том случае, еслиВы не удовлетворены полученным товаром (неправильный, поврежденный,Дефект, или товар не соответствует описанию), пожалуйста, верните его в течение 7 дней дляЗамена или возврат денег.Для любогоЛичные причины (выбрать не нравится или мне не нужен этот продуктБольше), возврат расходы по доставке будет нести ответственность покупателя. МыНе принимаются какие-либо предметы с запахами (духи. Дым, и т. Д.)
ВсеВозвращенные товары должны быть в оригинальной упаковке, и вы должны предоставитьНам с номером отслеживания доставки, конкретной причиной возврата,И ваш заказ ID.Характеристики
- Бренд
- MiLESEEY
- Подсветка
- Нет
- Номер модели
- Precise Thickness Gauge Meter


















